dmesg - Dell Inspiron 7000 IO BFQ
Linux version 4.12.0-xanmod1 (root@BabyMachine) (gcc version 7.1.0 (Debian 7.1.0-7) ) #2 SMP Sat Jul 8 18:10:49 UTC 2017
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000068171fff] usable
BIOS-e820: [mem 0x0000000068172000-0x0000000068172fff] ACPI NVS
BIOS-e820: [mem 0x0000000068173000-0x0000000078652fff] reserved
BIOS-e820: [mem 0x0000000078653000-0x0000000078694fff] ACPI data
BIOS-e820: [mem 0x0000000078695000-0x0000000078ff7fff] ACPI NVS
BIOS-e820: [mem 0x0000000078ff8000-0x00000000795fefff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000087f7fffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0.0 present.
DMI: Dell Inc. Inspiron 15 7000 Gaming/065C71, BIOS 01.00.07 05/24/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x87f800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 007C000000 mask 7FFC000000 uncachable
2 base 007B000000 mask 7FFF000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x68172 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fce40-0x000fce4f] mapped at [ffff8daf000fce40]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff8daf00096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x37a34a000, 0x37a34afff] PGTABLE
BRK [0x37a34b000, 0x37a34bfff] PGTABLE
BRK [0x37a34c000, 0x37a34cfff] PGTABLE
BRK [0x37a34d000, 0x37a34dfff] PGTABLE
BRK [0x37a34e000, 0x37a34efff] PGTABLE
BRK [0x37a34f000, 0x37a34ffff] PGTABLE
BRK [0x37a350000, 0x37a350fff] PGTABLE
RAMDISK: [mem 0x3226e000-0x3512efff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000EC5D0 000024 (v02 DELL )
ACPI: XSDT 0x00000000786600C0 000104 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 0x0000000078684068 00010C (v05 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 0x0000000078660258 023E10 (v02 DELL CBX3 01072009 INTL 20160422)
ACPI: FACS 0x0000000078FF1F80 000040
ACPI: APIC 0x0000000078684178 0000BC (v03 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 0x0000000078684238 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FIDT 0x0000000078684280 00009C (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: MCFG 0x0000000078684320 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: HPET 0x0000000078684360 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
ACPI: SSDT 0x0000000078684398 000372 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: BOOT 0x0000000078684710 000028 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: SSDT 0x0000000078684738 0012E1 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x0000000078685A20 002927 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: HPET 0x0000000078688348 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
ACPI: SSDT 0x0000000078688380 0008F8 (v02 INTEL xh_OEMBD 00000000 INTL 20160422)
ACPI: UEFI 0x0000000078688C78 000042 (v01 00000000 00000000)
ACPI: SSDT 0x0000000078688CC0 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x0000000078689BA0 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: WSMT 0x0000000078689C38 000028 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: SSDT 0x0000000078689C60 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x0000000078689F00 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: DBGP 0x000000007868CF08 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000007868CF40 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: SSDT 0x000000007868CF98 004559 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
ACPI: MSDM 0x00000000786914F8 000055 (v03 DELL CBX3 06222004 AMI 00010013)
ACPI: SLIC 0x0000000078691550 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
ACPI: SSDT 0x00000000786916C8 0000F0 (v02 SgRef SgPeg 00001000 INTL 20160422)
ACPI: DMAR 0x00000000786917B8 0000F0 (v01 INTEL KBL 00000001 INTL 00000001)
ACPI: NHLT 0x00000000786918A8 00002D (v00 INTEL EDK2 00000002 01000013)
ACPI: TPM2 0x00000000786918D8 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
ACPI: SSDT 0x0000000078691910 001C9E (v01 OptRef OptTabl 00001000 INTL 20160422)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
NODE_DATA(0) allocated [mem 0x87f7d5000-0x87f7fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000087f7fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009bfff]
node 0: [mem 0x0000000000100000-0x0000000068171fff]
node 0: [mem 0x0000000100000000-0x000000087f7fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
On node 0 totalpages: 8288525
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 6598 pages used for memmap
DMA32 zone: 422258 pages, LIFO batch:31
Normal zone: 122848 pages used for memmap
Normal zone: 7862272 pages, LIFO batch:31
Reserving Intel graphics memory at 0x000000007b800000-0x000000007f7fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x68172000-0x68172fff]
PM: Registered nosave memory: [mem 0x68173000-0x78652fff]
PM: Registered nosave memory: [mem 0x78653000-0x78694fff]
PM: Registered nosave memory: [mem 0x78695000-0x78ff7fff]
PM: Registered nosave memory: [mem 0x78ff8000-0x795fefff]
PM: Registered nosave memory: [mem 0x795ff000-0x7b7fffff]
PM: Registered nosave memory: [mem 0x7b800000-0x7f7fffff]
PM: Registered nosave memory: [mem 0x7f800000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x7f800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3821924579961850 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 39 pages/cpu @ffff8db77f400000 s119704 r8192 d31848 u262144
pcpu-alloc: s119704 r8192 d31848 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 8158994
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32498704K/33154100K available (9444K kernel code, 1533K rwdata, 3824K rodata, 2072K init, 1696K bss, 655396K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 37199 entries in 146 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:2048 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 2800.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5616.00 BogoMIPS (lpj=5616000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170303
ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20170303/dswload-210)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170303/psobject-241)
ACPI Exception: AE_NOT_FOUND, (SSDT:xh_OEMBD) while loading table (20170303/tbxfload-228)
ACPI Error: 1 table load failures, 10 successful (20170303/tbxfload-246)
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000007837c000 end: 0x0000007839bfff
DMAR: RMRR base: 0x0000007b000000 end: 0x0000007f7fffff
DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz (family: 0x6, model: 0x9e, stepping: 0x9)
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 6: ee2000000040110a
mce: [Hardware Error]: TSC 0 ADDR fef1ffc0 MISC 7880010086
mce: [Hardware Error]: PROCESSOR 0:906e9 TIME 1499617780 SOCKET 0 APIC 0 microcode 5e
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 7: ee2000000040110a
mce: [Hardware Error]: TSC 0 ADDR fef1ce40 MISC 47880010086
mce: [Hardware Error]: PROCESSOR 0:906e9 TIME 1499617780 SOCKET 0 APIC 0 microcode 5e
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 8: ee2000000040110a
mce: [Hardware Error]: TSC 0 ADDR fef1ff40 MISC 7880010086
mce: [Hardware Error]: PROCESSOR 0:906e9 TIME 1499617780 SOCKET 0 APIC 0 microcode 5e
mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 9: ee2000000040110a
mce: [Hardware Error]: TSC 0 ADDR fef1ff00 MISC 3880010086
mce: [Hardware Error]: PROCESSOR 0:906e9 TIME 1499617780 SOCKET 0 APIC 0 microcode 5e
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (44945.19 BogoMIPS)
sched_clock: Marking stable (564000000, 0)->(568303690, -4303690)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x68172000-0x68172fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x78695000-0x78ff7fff] (9842688 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3822520892550000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 16:29:41, date: 07/09/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
Simple Boot Flag at 0x47 set to 0x80
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 36 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DB75B246800 000651 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DB75AE4E000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DB75AC5B800 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DB75ACD8800 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x7f800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:5910] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:591b] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd4ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xd5220000-0xd5227fff 64bit]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xd5210000-0xd521ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xd5238000-0xd5238fff 64bit]
pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
pci 0000:00:15.0: reg 0x10: [mem 0xd5237000-0xd5237fff 64bit]
pci 0000:00:15.1: [8086:a161] type 00 class 0x118000
pci 0000:00:15.1: reg 0x10: [mem 0xd5236000-0xd5236fff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd5235000-0xd5235fff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xd5230000-0xd5231fff]
pci 0000:00:17.0: reg 0x14: [mem 0xd5234000-0xd52340ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xd5233000-0xd52337ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a152] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xd522c000-0xd522ffff]
pci 0000:00:1f.3: [8086:a171] type 00 class 0x040380
pci 0000:00:1f.3: reg 0x10: [mem 0xd5228000-0xd522bfff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xd5200000-0xd520ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xd5232000-0xd52320ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [10de:1c8c] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xd3000000-0xd307ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xd5104000-0xd5104fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xd5100000-0xd5103fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xd5100000-0xd51fffff]
pci 0000:03:00.0: [8086:3165] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xd5000000-0xd5001fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 03]
pci 0000:00:1c.5: bridge window [mem 0xd5000000-0xd50fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
pci 0000:00:02.0: vgaarb: no bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
e820: reserve RAM buffer [mem 0x68172000-0x6bffffff]
e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x1800-0x18fe] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs DLL0767 PNP0f13 (active)
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0xff00-0xfffe] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd30fffff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xd5100000-0xd51fffff]
pci 0000:00:1c.5: PCI bridge to [bus 03]
pci 0000:00:1c.5: bridge window [mem 0xd5000000-0xd50fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x7f800000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xc0000000-0xd30fffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xd5100000-0xd51fffff]
pci_bus 0000:03: resource 1 [mem 0xd5000000-0xd50fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 47876K
DMAR: ACPI device "device:6e" under DMAR at fed91000 as 00:15.0
DMAR: ACPI device "device:6f" under DMAR at fed91000 as 00:15.1
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x64172000-0x68172000] (64MB) mapped at [ffff8daf64172000-ffff8daf68171fff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879c5f06f2, max_idle_ns: 440795220049 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1499617781.381:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
vesafb: mode is 3840x2160x32, linelength=15360, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xb0000000, mapped to 0xffffab9c04000000, using 32448k, total 32448k
Console: switching to colour frame buffer device 480x135
fb0: VESA VGA frame buffer device
clocksource: Switched to clocksource tsc
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (25 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
ACPI: Battery Slot [BAT0] (battery present)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.12.0-xanmod1 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.12.0-xanmod1 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: Disabling energy efficiency optimization
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x906e9, pf=0x20, revision=0x5e
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 34f46a576be4c978dcf51652ab6d143d4db6f733'
zswap: loaded using pool lz4/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 9:305:489
rtc_cmos 00:02: setting system clock to 2017-07-09 16:29:43 UTC (1499617783)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2072K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 780K
Freeing unused kernel memory: 272K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
hidraw: raw HID events driver (C) Jiri Kosina
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0 eth0: RTL8168h/8111h at 0xffffab9c03181000, d4:81:d7:8d:42:eb, XID 14100800 IRQ 125
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
r8169 0000:02:00.0 enp2s0: renamed from eth0
ahci 0000:00:17.0: flags: 64bit ncq sntf stag pm led clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
usb 1-4: new full-speed USB device number 2 using xhci_hcd
ata1: SATA max UDMA/133 abar m2048@0xd5233000 port 0xd5233100 irq 124
ata2: SATA max UDMA/133 abar m2048@0xd5233000 port 0xd5233180 irq 124
usb 1-4: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[drm] Memory usable by graphics device = 4096M
usb 1-12: new high-speed USB device number 3 using xhci_hcd
checking generic (b0000000 1fb0000) vs hw (b0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4648]
random: fast init done
usb 1-12: New USB device found, idVendor=0c45, idProduct=6a06
usb 1-12: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 1-12: Product: Integrated_Webcam_HD
usb 1-12: Manufacturer: 1234567890-1226
psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1206..]
psmouse serio1: synaptics: Your touchpad (PNP: DLL0767 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ATA-10: TOSHIBA THNSNK128GVN8 M.2 2280 128GB, K8DC4101, max UDMA/100
ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA THNSNK12 4101 PQ: 0 ANSI: 5
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x0, board id: 3240, fw id: 2374689
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
[drm:lspcon_init [i915]] *ERROR* Failed to probe lspcon
[drm:intel_ddi_init [i915]] *ERROR* LSPCON init failed on port B
[drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input8
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: ATA-8: KINGSTON SV300S37A240G, 600ABBF0, max UDMA/133
ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
fbcon: inteldrmfb (fb0) is primary device
[drm] RC6 on
Console: switching to colour frame buffer device 480x135
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
raid6: sse2x1 gen() 12482 MB/s
raid6: sse2x1 xor() 9138 MB/s
raid6: sse2x2 gen() 15591 MB/s
raid6: sse2x2 xor() 10391 MB/s
raid6: sse2x4 gen() 17957 MB/s
raid6: sse2x4 xor() 10729 MB/s
raid6: avx2x1 gen() 25345 MB/s
raid6: avx2x1 xor() 17479 MB/s
raid6: avx2x2 gen() 31050 MB/s
raid6: avx2x2 xor() 19115 MB/s
raid6: avx2x4 gen() 35015 MB/s
raid6: avx2x4 xor() 19765 MB/s
raid6: using algorithm avx2x4 gen() 35015 MB/s
raid6: .... xor() 19765 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
Btrfs loaded, crc32c=crc32c-intel
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Journal Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Load Kernel Modules...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda1): re-mounted. Opts: discard,errors=remount-ro
systemd-journald[442]: Received request to flush runtime journal from PID 1
random: crng init done
tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
input: Intel HID events as /devices/platform/INT33D5:00/input/input9
intel-hid INT33D5:00: platform supports 5 button array
input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input10
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
idma64 idma64.0: Found Intel integrated DMA 64-bit
intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
idma64 idma64.1: Found Intel integrated DMA 64-bit
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
wmi: Mapper loaded
usbcore: registered new interface driver btusb
media: Linux media interface: v0.10
Bluetooth: hci0: read Intel version: 370810011003110e00
Linux video capture interface: v2.00
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
nvidia-nvlink: Nvlink Core is being initialized, major device number 241
nvidia 0000:01:00.0: enabling device (0004 -> 0007)
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 381.22 Thu May 4 00:55:03 PDT 2017 (using threaded interrupts)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 381.22 Thu May 4 00:21:48 PDT 2017
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-29.ucode failed with error -2
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
dell_wmi: Detected Dell WMI interface version 1
input: Dell WMI hotkeys as /devices/virtual/input/input11
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-28.ucode failed with error -2
uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6a06)
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
uvcvideo 1-12:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-12:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-12:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-12:1.0: Entity type for entity Camera 1 was not initialized!
input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input12
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
iwlwifi 0000:03:00.0: capa flags index 3 larger than supported by driver
iwlwifi 0000:03:00.0: loaded firmware version 27.455470.0 op_mode iwlmvm
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 240
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal thermal_zone8: failed to read out thermal zone (-5)
iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
Adding 1952764k swap on /dev/sda5. Priority:-1 extents:1 across:1952764k SSFS
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=2 (0x14/0x1b/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
i2c_hid i2c-DLL0798:00: i2c-DLL0798:00 supply vdd not found, using dummy regulator
input: DLL0798:00 06CB:7E92 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-DLL0798:00/0018:06CB:7E92.0001/input/input14
hid-multitouch 0018:06CB:7E92.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL0798:00 06CB:7E92] on i2c-DLL0798:00
audit: type=1400 audit(1499617794.434:2): apparmor="STATUS" operation="profile_load" name="/usr/bin/lxc-start" pid=918 comm="apparmor_parser"
audit: type=1400 audit(1499617794.435:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ippusbxd" pid=922 comm="apparmor_parser"
audit: type=1400 audit(1499617794.446:4): apparmor="STATUS" operation="profile_load" name="lxc-container-default" pid=915 comm="apparmor_parser"
audit: type=1400 audit(1499617794.446:5): apparmor="STATUS" operation="profile_load" name="lxc-container-default-cgns" pid=915 comm="apparmor_parser"
audit: type=1400 audit(1499617794.446:6): apparmor="STATUS" operation="profile_load" name="lxc-container-default-with-mounting" pid=915 comm="apparmor_parser"
audit: type=1400 audit(1499617794.446:7): apparmor="STATUS" operation="profile_load" name="lxc-container-default-with-nesting" pid=915 comm="apparmor_parser"
audit: type=1400 audit(1499617794.448:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=925 comm="apparmor_parser"
audit: type=1400 audit(1499617794.448:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-digikam" pid=924 comm="apparmor_parser"
audit: type=1400 audit(1499617794.448:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-digikam///usr/sbin/mysqld" pid=924 comm="apparmor_parser"
audit: type=1400 audit(1499617794.448:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=923 comm="apparmor_parser"
bbswitch: version 0.8
bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170303/nsarguments-95)
bbswitch: detected an Optimus _DSM function
bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170303/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170303/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170303/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170303/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170303/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170303/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170303/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170303/nsarguments-95)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
new mount options do not match the existing superblock, will be ignored
zram: Added device: zram0
zram: Added device: zram1
zram: Added device: zram2
zram: Added device: zram3
zram: Added device: zram4
zram: Added device: zram5
zram: Added device: zram6
zram: Added device: zram7
input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
zram0: detected capacity change from 0 to 2083184640
Adding 2034356k swap on /dev/zram0. Priority:5 extents:1 across:2034356k SSFS
zram1: detected capacity change from 0 to 2083184640
Adding 2034356k swap on /dev/zram1. Priority:5 extents:1 across:2034356k SSFS
zram2: detected capacity change from 0 to 2083184640
Adding 2034356k swap on /dev/zram2. Priority:5 extents:1 across:2034356k SSFS
zram3: detected capacity change from 0 to 2083184640
Adding 2034356k swap on /dev/zram3. Priority:5 extents:1 across:2034356k SSFS
zram4: detected capacity change from 0 to 2083184640
Adding 2034356k swap on /dev/zram4. Priority:5 extents:1 across:2034356k SSFS
zram5: detected capacity change from 0 to 2083184640
Adding 2034356k swap on /dev/zram5. Priority:5 extents:1 across:2034356k SSFS
zram6: detected capacity change from 0 to 2083184640
Adding 2034356k swap on /dev/zram6. Priority:5 extents:1 across:2034356k SSFS
zram7: detected capacity change from 0 to 2083184640
Adding 2034356k swap on /dev/zram7. Priority:5 extents:1 across:2034356k SSFS
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170303/nsarguments-95)
nvidia-uvm: Unloaded the UVM driver in 8 mode
[drm] [nvidia-drm] [GPU ID 0x00000100] Unloading driver
nvidia-modeset: Unloading
nvidia-nvlink: Unregistered the Nvlink Core, major device number 241
bbswitch: disabling discrete graphics
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170303/nsarguments-95)
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 00:26:3e:e6:ff:4b
wlp3s0: send auth to 00:26:3e:e6:ff:4b (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 00:26:3e:e6:ff:4b (try 1/3)
wlp3s0: RX AssocResp from 00:26:3e:e6:ff:4b (capab=0x501 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
kauditd_printk_skb: 19 callbacks suppressed
audit: type=1400 audit(1499617800.984:30): apparmor="DENIED" operation="open" profile="/sbin/dhclient" name="/etc/ld.so.preload" pid=3590 comm="dhclient" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1499617800.992:31): apparmor="DENIED" operation="open" profile="/usr/lib/NetworkManager/nm-dhcp-helper" name="/etc/ld.so.preload" pid=3595 comm="nm-dhcp-helper" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1499617801.051:32): apparmor="DENIED" operation="open" profile="/usr/lib/NetworkManager/nm-dhcp-helper" name="/etc/ld.so.preload" pid=3616 comm="nm-dhcp-helper" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1499617801.545:33): apparmor="DENIED" operation="open" profile="/usr/lib/telepathy/mission-control-5" name="/etc/ld.so.preload" pid=3981 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
iwlwifi 0000:03:00.0: No association and the time event is over already...
wlp3s0: Connection to AP 00:26:3e:e6:ff:4b lost
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
QDBusConnection[4092]: segfault at 7f618665f368 ip 00007f619e57f6c7 sp 00007f6186e619e0 error 4 in libQt5Core.so.5.6.1[7f619e2cd000+4c0000]
wlp3s0: authenticate with 00:26:3e:e6:ff:4a
wlp3s0: send auth to 00:26:3e:e6:ff:4a (try 1/3)
QDBusConnection[4159]: segfault at 7f629215f368 ip 00007f62aa0366c7 sp 00007f62929619e0 error 4 in libQt5Core.so.5.6.1[7f62a9d84000+4c0000]
QDBusConnection[4161]: segfault at 7f2bed4e7368 ip 00007f2c053ac6c7 sp 00007f2bedce99e0 error 4 in libQt5Core.so.5.6.1[7f2c050fa000+4c0000]
wlp3s0: send auth to 00:26:3e:e6:ff:4a (try 2/3)
wlp3s0: authenticated
wlp3s0: associate with 00:26:3e:e6:ff:4a (try 1/3)
wlp3s0: RX AssocResp from 00:26:3e:e6:ff:4a (capab=0x421 status=0 aid=2)
wlp3s0: associated
audit: type=1400 audit(1499617806.848:34): apparmor="DENIED" operation="open" profile="/usr/sbin/ntpd" name="/etc/ld.so.preload" pid=4427 comm="ntpd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1499618095.512:35): apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/etc/ld.so.preload" pid=16859 comm="cups-exec" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1499618095.590:36): apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/etc/ld.so.preload" pid=16861 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1499618095.591:37): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/etc/ld.so.preload" pid=16862 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1499618095.641:38): apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/etc/ld.so.preload" pid=16869 comm="cups-exec" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1499618095.641:39): apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/etc/ld.so.preload" pid=16869 comm="dbus" requested_mask="r" denied_mask="r" fsuid=7 ouid=0
wlp3s0: disconnect from AP 00:26:3e:e6:ff:4a for new auth to 00:26:3e:a3:8e:4a
wlp3s0: authenticate with 00:26:3e:a3:8e:4a
wlp3s0: send auth to 00:26:3e:a3:8e:4a (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 00:26:3e:a3:8e:4a (try 1/3)
wlp3s0: RX AssocResp from 00:26:3e:a3:8e:4a (capab=0x421 status=0 aid=2)
wlp3s0: associated